Code: CSX.0394
Bauteile: 1
Aussehen: Flüssig
DETERG FLOOR - HC is a biological detergent for hydrocarbons, liquid disintegrant based on selected microorganisms with the ability to instantly degrade hydrocarbons (HC) and organic residues. It is used for cleaning hard and semi-porous surfaces contaminated by hydrocarbons and mineral oils in the industrial and petrochemical sectors. Suitable for cleaning the floors of service stations, industrial floors, metalworking workshops, car workshops, etc.
Haltbarkeit: 12 monate
100% umweltfreundliches Material
Ohne Lösungsmittel
Nur mit Schutzhandschuhen verwenden
Nicht entflammbar
Spezifisches Gewicht: 1.00 – 1.05 g/cm³
VOC-Gehalt
9.51 %
pH
7.0 – 9.5 _
- Gelb
- Kanister 5 l
The dilution of the product with clean water free of impurities that is usually carried out varies from 1 to 3% (for example: 10 liters of water + 0.1 / 0.3 liters of DETERG FLOOR-HC). For surfaces particularly impregnated with hydrocarbons such as mechanical workshops, petrol stations, etc. a 5% dilution is recommended, which can be increased up to 10%.
Variable according to the dilution in water carried out, the porosity of the substrate, the depth of penetration of the hydrocarbons and the extent of the area to be treated. More applications may be required to achieve complete removal of harmful impregnants.
Deep cleaning of industrial floors affected by hydrocarbon (HC) stains such as garages, car parks, mechanical workshops, docks, car workshops, etc.
It is advisable to treat surfaces previously cleaned of soluble salts and dirt, taking care to eliminate even the parts with poor surface adhesion. It is always essential to close the gaps greater than 0.3 mm. Apply on dry surfaces. In case of rain or surface washing, wait for the substrate to dry.
Shake DETERG FLOOR-HC well before use.
Dilute the product according to your needs.
Pour the product diluted with water directly on the surface to be treated and spread it with a long-bristled brush, a plush roller or a suitable liquid scraper. Wait the necessary time for the product to act at its best (usually it takes several hours) and then clean the treated surface with plenty of water.
It may be necessary to repeat the operation on particularly porous substrates and particularly impregnated with hydrocarbons.
PLEASE NOTE: for the product to work properly, the treated surface must remain wet with the solution. For this reason, avoid applying it in the sun or in environments subject to high temperatures.
- Guss
- Pinsel
- Wasser
- Beton
- Stahl
Vuoi saperne di più sui nostri prodotti?